Inductive Load Suppressor
These devices, when installed across an
inductive load, such as a contactor, solenoid or relay, will
suppress transient surges during a switching. This will enhance
relay life and provide increased reliability of operation.
There are two devices available, one for
use in 115 volt circuits and one for use in 230 volt circuits.
Red
Lion Controls Inductive Load Supressor
Ordering Information
| Model No. |
Description |
Part Number |
| ILS1 |
115 VAC Inductive Load Suppressor |
ILS11500 |
| ILS2 |
230 VAC Inductive Load Suppressor |
ILS23000 |
ILS Specifications:*
DEVICE
MODEL
NUMBER
|
RATED VOLTAGE |
RATED PEAK
SINGLE PULSE
TRANSIENT CURRENT (AMPS) |
SINGLE PULSE
TRANSIENTENERGY JOULES |
POWER
DISSIPATION
WATTS |
CLAMPING
VOLTAGE
VOLTS |
| AC VOLTS |
DC VOLTS |
| ILS1 |
130 |
175 |
6500 |
80 |
1.0 |
340V @ 100A |
| ILS2 |
275 |
370 |
6500 |
150 |
1.0 |
710V @ 100A |
* NOTE: These devices will suppress most transient surges. However,
if the device heats up or stops functioning after a short period
of time, a higher joules rated device may be required.
|
