Home > Applications

• Pressure Transducer sends 4-20 MA DC signal to Flow Computer via standard 2 leg copper coax cable, any length to 2000 feet or more
  
  
• 100 Ohm PLT RTD. with or without dry well, hooks up directly to Flow Computer via 3-wire Copper Coax Cable, and length, to 2000 feet or more
  
  
• On Turbine Meters, Pulse Amplifier sends 3 wire digital 5 VDC signal to Flow Computer (some care must be taken with voltage drop due to distance); 4-20 mA output flow devices send 2 wire signal to Flow Computer
  
  
• 120VAC Flow Computer calculates ACTUAL MASS FLOW, Rate and Totalization with retransmitted 4-20 mA DC, 10 amp relay output alarms, 24 VDC 100 mA excitation for transmitters, Optional RS232
  
  
• 5 Volt Pulse output to remote Counter/Totalizer
  
  
• Retransmitted 4-20 mA DC output to Strip or Round Chart Recorder or Datalogger
  
  
• Optional RS232 output to Printer or Computer or Datalogger
  
  
• 10 amp Alarm Relays to activate Bell, Light or Mini-Annunciator
  
  

All Ancillary Equipment Available from BRANOM