R-C Snubber Noise and Arc Suppressor
GENERAL DESCRIPTION
The R-C Snubber is intended to suppress the "inductive kick"
from motors, solenoids or relay coils. High energy noise spikes
are generated whenever current is interrupted through an inductive
load. These noise spikes may interfere with associated equipment
causing erratic operation and may also accelerate relay contact
wear. Applied across an inductive load, the R-C snubber suppresses
the noise spikes and extends contact life.
 |
Ordering Information:
|
Model No.
|
Description
|
Part Number
|
|
SNUB
|
R-C Snubber Inductive Load Suppressor
|
SNUB0000
|
|
UL recognized component
(Okaya Electric America, Inc. PN#XEB0471, UL-1414, File # E47474)
APPLICATION
The R-C snubber inductive load suppressor should be applied
as shown below. Placing the suppressor across the contact
in many cases can work as well, but for maximum effect, it
is best to place the suppressor directly across the load.
All inductive loads in a system should be suppressed in this
manner to avoid mutual interference; the suppressors are effective
with both AC and DC circuits.
|
