• Submersible Transmitters
  • Capacitance probe switches
  • Mechanical floats
  • Single & Multi-Point Level Switches
  • Rotating paddle switches
  • Vibrating tuning forks switches

Point Level Instrumentation

Point level sensors measure preset levels of liquid, slurry, or solid media and open or close an electrical contact at the desired setpoint. When the media reaches the specified level, the output transmitted by the point level switch triggers an alarm or display. In some applications, the sensors are also used to trigger pumps, valves, or other controls to return the media to the preset level.

Install point level switches horizontally or vertically based on your application or use the devices with multiple sensors to provide multi-stage point level measurement.  Point level instrumentation is versatile enough for use across a broad range of applications, including monitoring levels in:

  • Storage Silos

  • Containers

  • Vessels

  • Holding Ponds

  • Natural Bodies of Water

Point Level Measurement Sensors Provide Reliable Overflow Prevention

For applications that require simple, level control or alarms, Branom Instrument Co. stocks point level switches from some of the industry’s most trusted manufacturers. We offer floats, paddle switches, capacitance probes, vibrating tuning forks and more that can be used in conjunction with controls or alarms to prevent overflows and runouts in vessels of all sizes. 

Capacitance Probe Switches

Capacitance probe switches are rod-shaped sensors that provide point level measurement of liquids, slurries, and pastes. Once installed, the sensors and vessel serve as the two electrodes that form a capacitor, and the media inside the vessel represents the dielectric. The radio frequency signals produced by the capacitance point level switch calculate changes in current and transmit them as an output signal.

Most capacitance point level switches are made of stainless steel and can withstand high temperatures and corrosive environments, making them ideal for use in chemical applications. Branom offers capacitance probe switches in several options from KROHNE and Gems.  

Mechanical Floats

Mechanical float switches are mechanically actuated float sensors used for point level measurement of corrosive and non-corrosive liquids and slurries. When fluid levels rise to a specified level, the mechanical float switch may automatically trigger a pump or valve that remains on until the fluid returns to the desired level.

The sensors are often installed at two different levels to prevent overflow in the event the first pump fails. Mechanical float switches are commonly used for point level measurement of water and wastewater. Our inventory includes corrosion-resistant mechanical floats from Gems and Dwyer.  

Single & Multi-Point Level Switches

Single point level float switches detect the level of a single liquid contained in a tank or vessel. These switches are horizontally or vertically mounted and actuate once the fluid reaches a certain level.

Use single point level switches in applications where you only need to monitor one fluid level. Multi-point float level switches allow you to track and measure multiple fluid points within the same tank or vessel. You can also use multi-point switches to simultaneously measure two or more liquids with different specific gravities contained in the same tank, or for differential level control. We offer low maintenance point level switches from GemsDwyer, and Flowline.  

Rotating Paddle Switches

Rotary paddle switches are constructed of a low-speed motor with a paddle wheel and are used for point level measurement of dry bulk solids. They can be installed horizontally, vertically, or at the base of a vessel and can be used for single or multi-point level measurement.

The rotary paddle switch unit operates using a self-powered motor and shaft that causes the paddle to rotate continuously. When a solid material contacts the paddle, it causes it to stop moving, triggering the sensor to indicate a specific level was reached. As the silo or vessel empties, the paddle begins rotating again.

This type of point level switch is best for use with pelletized, granular, and powdered media. Our inventory includes rotating paddle switches from Bindicator, Dwyer, and UWT.   

Vibrating Tuning Fork Switches

Vibrating tuning fork switches are point level switches designed based on the vibrating tuning fork principle. These instruments take point level measurement of solids and liquids and can be used in high static bulk powder environments.

To provide point level measurement readings, the vibrating tuning fork level switch is positioned inside a tank at a specified level. Voltage is then applied to the tuning fork to create a frequency that produces oscillations of the fork. The frequency then changes when the vibrating tuning fork contacts a liquid or solid. These changes are read by the sensor and converted into switching signals that trigger a high- or low-level alarm, display or control.

Branom provides vibrating tuning fork switches from KROHNEDwyer, and Bindicator.

Request a Quote for Point Level Switches and Accessories

We maintain a huge, in-stock inventory and offer startup, calibration, and other technical services or all our point level control and monitoring equipment. Contact us today to learn more about point level measurement solutions.

Setra Systems Inc (dba Gems Sensors)
Return For Repair/Replace Under Warranty

DFC1C0D0103

 
On Hand: 0
Setra Systems Inc (dba Gems Sensors)
ELECTRODE FTG 3/8"NPT 316SS W/TEFLON SLEEVE-CALL FOR PRICING

3B1B6

 
On Hand: 4
Venture Measurement Company LLC
BINDICATOR ROLL PIN

LUA031190

0.85 0.85 USD
On Hand: 39
Mercury Displacement Industries Inc (MDI)
Tether Clamp

TC-0

1.25 1.25 USD
On Hand: 2
Alaskan Copper And Brass
1/4"ROUND T-316,CD/ST ANNEALED STAINLESS STEEL ROD SS

151592 PRICE/FOOT

1.46 1.46 USD
On Hand: 243
Mercury Displacement Industries Inc (MDI)
Tether Clamp w/ 2 1/2 Inch Max. Pipe Clamp

TC-1

2.00 2.0 USD
On Hand: 3
Setra Systems Inc (dba Gems Sensors)
Warrick Series 3W Type Probe Suspension Wire

3Z1A

2.52 2.52 USD
On Hand: 1,263
3.00 3.0 USD
On Hand: 30
Dwyer Instruments Inc
Dwyer Float Switch Counter Weight

A-457

3.40 3.4 USD
On Hand: 0
Mercury Displacement Industries Inc (MDI)
Tether Clamp w/ 3 1/2 Inch Max. Pipe Clamp

TC-2

3.50 3.5 USD
On Hand: 5
Setra Systems Inc (dba Gems Sensors)
WARRICK REMOTE SWITCH NORMALLY CLOSED

7760227

4.75 4.75 USD
On Hand: 1
Setra Systems Inc (dba Gems Sensors)
COPPER GASKET FOR 3B SERIES ELECTRODES-CHECK FOR PRICING

7760514

7.50 7.5 USD
On Hand: 27
Setra Systems Inc (dba Gems Sensors)
1/4" NPT Port Adapter (Polypropylene), FS-4 Series

158602

8.00 8.0 USD
On Hand: 14
9.50 9.5 USD
On Hand: 3
Setra Systems Inc (dba Gems Sensors)
TEFLON HEAT SHRINK-CHECK FACTORY FOR PRICING TEFLON SHEATHING

7755593

10.40 10.4 USD
On Hand: 52
Setra Systems Inc (dba Gems Sensors)
11 PIN SOCKET FOR WARRICK RELAY

63262

10.85 10.85 USD
On Hand: 28
Mercury Displacement Industries Inc (MDI)
7762381 CAST IRON WEIGHT FOR FLOAT SWITCH

PM590

16.00 16.0 USD
On Hand: 196
Setra Systems Inc (dba Gems Sensors)
Adapter for Suspension Wire

3Z1B

16.77 16.77 USD
On Hand: 13
Venture Measurement Company LLC
Mounting Plate, Nylon, for Mini-Roto

LMR130025

20.00 20.0 USD
On Hand: 0
Venture Measurement Company LLC
Bindicator Insertable Paddle, Nylon, for Mini Roto

LMR120003

21.53 21.53 USD
On Hand: 0
Paramount Supply Co.
SHAFT GUARD, 1 1/4"NPT GALVANIZED PIPE

LUB040200-12"

23.46 23.46 USD
On Hand: 1
Venture Measurement Company LLC
4-Vane Paddle (Nylon) For Mini-Roto

LMR120006

25.70 25.7 USD
On Hand: 0
Venture Measurement Company LLC
AERATOR 3 3/4" X 7 1/2" FIBERGLS/STL DIFFUSER,ZINC PLTD STL

LBF900001

26.40 26.400000000000002 USD
On Hand: 1
Setra Systems Inc (dba Gems Sensors)
8 PIN DIN SOCKET FOR WARRICK RELAY

7763310

26.83 26.830000000000002 USD
On Hand: 0