Skip to Content
  1. All Products
  2. Level
  3. Warrick 26NM Series Low Water Cutoff Plug-In Module, 26k Ohm Sensitivity, Non-Powered Contacts, 120 VAC,11 Pin Octal DIN Mount, No Enclosure
Public Pricelist (v2)
Warrick 26NM Series Low Water Cutoff Plug-In Module, 26k Ohm Sensitivity, Non-Powered Contacts, 120 VAC,11 Pin Octal DIN Mount, No Enclosure
Representative photo. Please check item description for details.

Warrick 26NM Series Low Water Cutoff Plug-In Module, 26k Ohm Sensitivity, Non-Powered Contacts, 120 VAC,11 Pin Octal DIN Mount, No Enclosure

https://www.branom.com/web/image/product.template/181504/image_1920?unique=c1b9893
(0 review)

Series 26NM Low-Water Cutoff Plug-In Module is designed for low-water cutoff protection and meets CSD1 requirements for boiler low-water cutoff. Series 26M features powered contacts. If non-powered contacts are required, please contact factory and request

information on Series 26NM. Options include: Dirty Electrode Detection, Manual Reset Button (If level drops, control is deactivated until liquid level returns to normal and pushbutton is depressed), Power Outage Feature (ignores nuisance outages and

resets when power is restored), Test and time delays are available.

Sku: 26NMC1B0
Model: 26NM
Sensor Type: Low Water Cutoff Controls
Mode Of Operation: Direct
Sensitivity: 26 K ohms
Control Style: Plug-In Module
Socket Style: 11 Pin Octal
Standoff Style: N/A
Enclosure: N/A
Contact Design: 1 Normally Open (non-powered)
Contact Rating: 10 Amp Resistive 1/3 horse power
Supply Voltage: 120 VAC
Secondary Voltage: 12 VAC
Terminal Style: Screw Connector
Minimum Temperature: -40°F
Maximum Temperature: 150°F
Protection: Non-Intrinsically Safe
Approvals: UL 353 for use in Boilers
Weight: 1.1

$ 358.91 358.91 USD $ 358.91

$ 358.91

Not Available For Sale

    This combination does not exist.

    Contact Us
    Product Datasheets

    Datasheet 1

    Share

    Series 26NM Low-Water Cutoff Plug-In Module is designed for low-water cutoff protection and meets CSD1 requirements for boiler low-water cutoff. Series 26M features powered contacts. If non-powered contacts are required, please contact factory and request

    information on Series 26NM. Options include: Dirty Electrode Detection, Manual Reset Button (If level drops, control is deactivated until liquid level returns to normal and pushbutton is depressed), Power Outage Feature (ignores nuisance outages and

    resets when power is restored), Test and time delays are available.

    Sku: 26NMC1B0
    Model: 26NM
    Sensor Type: Low Water Cutoff Controls
    Mode Of Operation: Direct
    Sensitivity: 26 K ohms
    Control Style: Plug-In Module
    Socket Style: 11 Pin Octal
    Standoff Style: N/A
    Enclosure: N/A
    Contact Design: 1 Normally Open (non-powered)
    Contact Rating: 10 Amp Resistive 1/3 horse power
    Supply Voltage: 120 VAC
    Secondary Voltage: 12 VAC
    Terminal Style: Screw Connector
    Minimum Temperature: -40°F
    Maximum Temperature: 150°F
    Protection: Non-Intrinsically Safe
    Approvals: UL 353 for use in Boilers
    Weight: 1.1