Wika TR40 Cable RTD, Single 3-Wire, 1/8 OD x 90° Bend (1.5" Hot/1.6" Cold), SS Sheath, 39" PTFE/PFA Leads w/Armor (Stripped)
Specifications according to data sheet: TE 60.40
Design: With lead wires
1xPt100, 3-wire
Class B, IEC 60751
Temperature range of selected class: -50...+500°C
Probe design: 90 degree bend
Lead wire insulation: Armour over PTFE/PFA, application range -60...+250 °C
Cable length [W]: 39.0 inch
Cable ending: Stripped leads
Process connection: Compression fitting with stainless steel ferrule
Thread size: 1/4 NPT
Material process connection: Stainless steel 316
Probe diameter: 1/8 inch / 0.125 inch (3.17 mm)
Probe material: Stainless steel 316L A-dimension [A]: 1.6 inch Dimension [X]: 1.5 inch
Dimension [Y]: 3.4 inch
Stripped length [L]: 6.0 inch
Lower ambient temperature: -40 °C
Mechanical requirements: Standard probe tip (max. 6 g, peak to peak)
Ingress protection: IP54, IEC 60529, dust-protected/protection against splashing water
Specifications according to data sheet: TE 60.40
Design: With lead wires
1xPt100, 3-wire
Class B, IEC 60751
Temperature range of selected class: -50...+500°C
Probe design: 90 degree bend
Lead wire insulation: Armour over PTFE/PFA, application range -60...+250 °C
Cable length [W]: 39.0 inch
Cable ending: Stripped leads
Process connection: Compression fitting with stainless steel ferrule
Thread size: 1/4 NPT
Material process connection: Stainless steel 316
Probe diameter: 1/8 inch / 0.125 inch (3.17 mm)
Probe material: Stainless steel 316L A-dimension [A]: 1.6 inch Dimension [X]: 1.5 inch
Dimension [Y]: 3.4 inch
Stripped length [L]: 6.0 inch
Lower ambient temperature: -40 °C
Mechanical requirements: Standard probe tip (max. 6 g, peak to peak)
Ingress protection: IP54, IEC 60529, dust-protected/protection against splashing water
Specifications
| RTD: Brand | Wika |
| RTD: Accuracy | Class B |
| RTD: Circuit Type | Single 3-Wire, Single 3-Wire |
| RTD: Electrical Connection | PFA / Stranded Conductor / Flexible Leadwires |
| RTD: Output | Pl100 Ω |
| RTD: Length (Probe/Sheath/TW) | 1.5 in Hot/1.6" Cold |
| RTD: Stem Diameter | 1/8 in |
| RTD: Wetted Material | SS |
| RTD: Has Thermowell | No |
| RTD: Min Temp | -76 °F |
| RTD: Max Temp | 250 °F |