Description
Features:
- QT50U Chemical Resistant Series: Proximity Mode
- Range: 200 mm
- 6 m
- Input: 13-30 V dc
- Outputs: Analog: 0-10 V or 4-20 mA
- 2 m (6.5 ft) Cable
- Analog Current Output Rating: 1 kΩ or [(Vcc-5 V)/0.02 A] Ω, whichever is lower
- Min Operating Temperature: -20 °C
- Max Operating Temperature: 70 °C
- Power/Current Consumption (exclusive of load): 100 mA max @ 10 V dc; 40 mA max @ 30 V dc
- Temperature Warm-up Drift upon Power-up: < 7% of the sensing distance upon power-up.
- Power Supply: 10-30 VDC
- Temperature Effect (mm/°C): Uncompensated: 0.2% of distance/°C; Compensated: 0.02% of distance/°C
- Delay at Power-Up: 1500 ms
- Ingress Protection: IP67
- Sensing Beam: Ultrasonic
- Housing Style: Rectangular w/ Threaded Mount
- Max Sensing Distance: 6000 mm
- Sensing Mode (Detailed): Time of Flight
- Sensing Mode (General): Proximity
- Device Type: Sensor
- Housing Material_: PBT
- Feature: RS-232: No
- Feature: RS-485: No
- RS-422: No
- Analog Output: 0 to 10 VDC or 4 to 20 mA
- Feature: IO Link: No
- Feature: Wireless: No
- Feature: Quick Disconnect: No
- Max Op. Relative NC Humidity: 100%
- Feature: Chemical Resistant: Yes
- Storage Temp: -40 to 90 °C
- Number of Pins: 5
- Adjustments: Push Button (s)
- Feature: Timing (Hold/Delay): No
- Input/Output: Analog
- Barrel Diameter: 56
- Min Response Time: 100 ms
- Vibration: MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Feature: Ultrasonic: Yes
- Mechanical Shock: IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Analog Resolution/Discrete Repeatability: 1
- Min Sensing Distance: 200 mm
- Feature: Clear Object Detection: Yes
- Min Window Size: 20 mm
- Max Measurement Range: 1-20 m
- Output Protection: Protected against short circuit conditions
- SSI: No
- Profibus: No
- Feature: Remote Teach: Yes
- Analog Voltage Output Rating: 500 Ω min. load impedance
- Supply Protection Circuitry: Protected against reverse polarity and transient overvoltages
- Temp. Warm-up Drift (Notes 1): After 5 min, the apparent switchpoint is < 0.6% of the actual position.
- Temp. Warm-up Drift (Notes 2): After 25 min, the sensing position will be stable.
- Connection Type: Flying Leads
- NEMA / UL: NEMA 6P
- Cord/Cable Length: 2 m
- Barrel Thread: M56
- Feature: Common Ethernet Protocol: No
- Feature: PC Configurable: No
- Indicator Type: LED
- Warm-Up Time: 15 min
- Rep Rate: 96 ms
- Ultrasonic Frequency: 75 kHz