Representative photo. Please check item description for details.

FCI ST100A Series Biogas Insertion Thermal Mass Flow Meter

[P0] Flow Element: 350°F [177°C] Wet Gas MASSter; 316L Stainless Steel

[D] Process Connection: Compression Fitting, Teflon Ferrule : 1"

[0] Flange Required: Male NPT

[120] Insertion Length: 1-12" [25-305mm]

[H] Pipe Mounting and Flow Direction: Horizontal Pipe; Side Mount/Top Facing, L>R

[2] Transmitter Enclosure: Remote Mount, Aluminum; with NPT Cable Entries

[B] Interconnecting Cable Length: PVC Jacketed; 25 Feet [7.6 meters]

[H] Transmitter Power Supply and Display: 85 VAC to 265 VAC; with Digital Display and 4 Button, Through the Window Interface

[3E] Transmitter Outputs and Communications: (3) 4-20 mA Outputs; HART, Modbus; Frequency/Pulse Output; Ethernet Port

[F] Calibration Application: Custom Calibration: Hydrocarbons (Methane, Ethane, Propane, etc.)

[2] Calibration, Set-Up and Conditions: Extended Temp Comp and Vortab (VIP)

[0] Second Calibration Application: Not Required

[0] Second Calibration, Set-Up and Conditions: Not Required

[0] Additional Calibration Groups: Not Required

[1] Agency Approval: FM

This combination does not exist.